Brake replacement costs for a Honda Fit typically run from about $100 to $350 per axle for pads and rotors installed with aftermarket parts, and roughly $400 to $900 total for a complete two-axle job including labor. Prices vary by model year, whether the rear brakes are drums or discs, your location, and whether you choose OEM or aftermarket components.
The Honda Fit, produced across several generations, uses front disc brakes and rear brakes that may be drums or discs depending on year and trim. This article breaks down typical costs, what affects pricing, and ways to estimate a fair quote from a local shop.
What goes into the price
Several factors affect the final bill. The cost can change depending on whether you replace front brakes, rear brakes, or both, and whether you replace pads, rotors, drums, or calipers. Brand choice (OEM vs aftermarket) and local labor rates are key drivers as well.
Brake type and components
Front brakes on a Honda Fit are typically disc brakes with rotors and pads; rear brakes vary by model year and can be drums or discs. Replacing more components or choosing higher-end parts raises the price.
Cost breakdown by component
Prices below reflect typical aftermarket pricing in the United States as of 2026. Actual prices will vary by region, retailer, and vehicle generation.
- Front brake pads (pair for the front wheels): 30–70 USD
- Front brake rotors (two rotors for the front axle): 50–150 USD total
- Rear brakes (depends on setup):
- Rear drum brakes – shoes kit: 15–60 USD per set
- Rear disc brakes – pads (pair): 20–60 USD
- Rear discs – rotors (two rotors): 50–120 USD total
- Brake calipers (if replacement is needed): 60–220 USD each
- Hardware kit (pins, clips, anti-squeal shims): 5–25 USD
- Brake fluid and flush materials: 3–15 USD for materials; service may add labor
Overall, parts for a single-axle brake job with aftermarket components typically run in the neighborhood of a few hundred dollars, while a full two-axle replacement commonly lands in the $400–$900 range, not including tax or shop fees.
Cost scenarios: aftermarket vs OEM vs DIY
Price ranges can differ significantly depending on whether you buy aftermarket parts or OEM-equivalent parts from a dealer, and whether you perform the work yourself or hire a shop. The following scenarios give a sense of possible totals.
- All-new aftermarket parts on both axles (pads + rotors): Parts roughly $120–$260 per axle; labor typically $160–$350 per axle; total approximately $400–$900 for both axles.
- Front brakes only (pads + rotors) on both sides with aftermarket parts: Parts around $170–$360; labor around $160–$320; total roughly $330–$680.
- OEM/dealer parts on both axles (pads + rotors, or drums for rear if specified): Parts higher by about 20–50%; labor similar; total roughly $600–$1,200.
- DIY replacement (your own labor, aftermarket parts): Parts plus shop prices saved on labor; typical parts cost: $100–$260 per axle; total $200–$520 for both axles, assuming you do the work yourself.
Note: DIY costs exclude tools, mistakes, or needing to relearn techniques; safety should be the priority. Always ensure you can perform the job safely or consult a professional if unsure.
How to save money while staying safe
- Compare quotes from multiple shops and ask for itemized estimates. - Look for bundled brake service deals that include pad and rotor replacement, or a brake service package. - Consider aftermarket parts with solid warranties, which are often cheaper than OEM. - If your rear brakes are drums, ask whether the shop can source drums/shoes that fit your model year to avoid misfit issues. - Ensure the shop also inspects wear on calipers, lines, and the master cylinder as needed.
Summary
Brake costs for a Honda Fit vary with generation, parts chosen, and labor rates. For most drivers, a single axle with aftermarket pads and rotors runs roughly $120–$260 in parts plus $80–$200 in labor, and a full two-axle job commonly totals $400–$900. OEM parts or dealer service tends to push that range higher, while DIY work can lower the bill but requires care and proper tools. Planning ahead and getting multiple quotes helps ensure you get a fair price without compromising safety.
How much does a brake job cost on a Honda?
The average cost for a Honda Accord Brake Pad Replacement is between $291 and $349. Labor costs are estimated between $124 and $182 while parts are typically priced around $167.
Is a $99 brake special a good deal?
A $99 brake job sounds great… until you realize it's pads in a box, no hardware, no rotors, no workmanship, and definitely no warranty. Cheap brake deals often leave you paying much more in the end — in parts, in labour, and in headaches. Do it right the first time.
How much do brakes cost on a Honda Fit?
The average cost for a Honda Fit Brake Pad Replacement is between $289 and $338. Labor costs are estimated between $106 and $155 while parts are typically priced around $183. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
What is the most common problem with a Honda Fit?
Top Honda Fit Problems
- Honda Fit HVAC blower fan only works on high speed due to resistor pack failure.
- Check Engine Light and Stuttering While Driving.
- Front Door Arm Rest May Break.
- The Fuel Filler Door May Not Open.
- Rear Washer Nozzle Borken or Missing.
- Rattle noise from under driver side of dash.