The amount of oil a 2019 Jeep Cherokee Limited takes depends on the engine setup. If your Limited has the 2.4L engine, it requires about 4.6 quarts with a filter; if it has the 3.2L engine, it takes about 5.5 quarts with a filter. Always verify the exact figure for your vehicle using the owner’s manual or by checking the dipstick during a refill.
This article explains the two engine options available for the 2019 Cherokee Limited and how to determine the correct oil capacity for your specific model, including how to confirm which engine you have and what to check before filling.
Engine options and oil capacity
The Cherokee Limited in 2019 was offered with two primary engines. Here are their approximate oil capacities with filter changes:
- 2.4L Tigershark inline-4: about 4.6 quarts of oil (with filter).
- 3.2L Pentastar V6: about 5.5 quarts of oil (with filter).
Capacities are approximate and can vary slightly based on factors such as the oil type, filter brand, and whether a flush or extra steps are performed during service.
How to confirm which engine your Cherokee has
To determine the exact engine in your 2019 Cherokee Limited, check the window sticker on the driver’s door jamb, consult the vehicle’s VIN and build sheet, or look under the hood for the engine code badge. The 2.4L and 3.2L engines have distinct identifiers.
What to do when performing an oil change
When you’re about to change the oil, prepare the correct quantity based on your engine, use the manufacturer-recommended oil type, and add oil gradually while monitoring the dipstick to avoid overfilling.
Summary
For the 2019 Jeep Cherokee Limited, oil capacity varies by engine: roughly 4.6 quarts with a filter for the 2.4L inline-4, and roughly 5.5 quarts with a filter for the 3.2L V6. Always confirm the exact amount from your owner’s manual, VIN, or by checking the dipstick, and use the recommended oil type for your engine.