Eight quarts of engine oil are required for a full change on the 2019 Escalade's 6.2-liter V8 when a new filter is installed.
For the 2019 Escalade with the 6.2L V8, the official capacity is 8 quarts (about 7.6 liters) of engine oil when replacing the filter. The recommended oil grade is Dexos1 Gen 2 approved 5W-30. This specification applies to the standard engine configuration; always verify with the owner's manual or a GM service bulletin for any year or trim differences.
Official capacity and oil specs
Key figures and standards for the engine oil used in this vehicle are listed below.
- Oil capacity with filter: 8 quarts (approximately 7.6 liters)
- Recommended oil grade and dexos specification: Dexos1 Gen 2, 5W-30
- Filter replacement: Yes, change the oil filter during the oil change
These numbers are specific to the 2019 Escalade with the 6.2L V8. If you own a different model year or a variant of the Escalade, double-check the manual or GM's official data for any variance.
Practical tips for maintaining your oil
When planning an oil change, it's helpful to know exactly how much oil to stock and which filter to use.
- Stock up on 8 quarts of oil (Dexos1 Gen 2 5W-30) and one replacement oil filter
- Ensure you have the appropriate tools to perform a full drain and fill with the filter
- Dispose of old oil and filter according to local regulations
Having the correct quantity and parts on hand helps ensure a complete and proper oil change at the next service interval.
Summary
The 2019 Cadillac Escalade with the 6.2-liter V8 takes 8 quarts of engine oil with a filter, using Dexos1 Gen 2 5W-30 as the recommended viscosity. Always confirm specifics in the owner's manual or with a dealer, as some variations can occur by year or trim.


