The 2017 Nissan Sentra with the common 1.8-liter engine typically uses about 4.8 quarts of engine oil for a full oil change with a new filter; about 4.4 quarts if you’re not replacing the filter. This aligns with Nissan’s official capacity for that year and engine configuration.
Oil capacity for service work
These figures assume the standard 1.8L engine and the North American Sentra trims. They reflect the total oil needed when performing a full change with a new filter versus draining the oil without changing the filter.
- With filter replacement: 4.8 quarts (approximately 4.5 liters)
- Without filter replacement: 4.4 quarts (approximately 4.2 liters)
After refilling, check the dipstick and top off as needed to reach the full level indicated by the dipstick.
Oil type and service interval
Nissan generally recommends using a 0W-20 full synthetic oil for the 1.8L Sentra engine, with oil-change intervals defined by driving conditions and the oil type used. Always confirm exact specifications in your owner’s manual or with a Nissan dealership, especially if you are outside North America or using a non-standard oil.
Regional variations and quick takeaways
Some markets or model variants may have slightly different capacities or viscosity recommendations. The figures above reflect the North American 2017 Sentra with the 1.8L engine. If your vehicle has a different engine code or regional specification, consult the official manual or service bulletin for your VIN.
Summary: For most 2017 Nissan Sentra models with the 1.8L engine, budget about 4.8 quarts of engine oil for a full oil change with a new filter, or about 4.4 quarts if you’re not replacing the filter. Use 0W-20 full synthetic oil and consult the owner’s manual for exact intervals and regional variations.