The amount is approximately 5 quarts of engine oil for a full fill, including a new oil filter, on a 2002 Chevrolet Silverado with the 5.3-liter V8.
The 2002 Silverado’s 5.3L Vortec engine follows a standard spec: oil capacity is 5 quarts (about 4.7 liters) when changing the oil with a new filter. This capacity remains constant across typical oil brands and viscosities, but you should always verify the final level with the dipstick after a complete fill and engine run. Drive conditions and oil consumption can vary by vehicle, so adjust by checking the dipstick.
Official oil capacity and fill guidance
Below are the official capacity details and practical steps to reach the correct oil level during a change.
- Official capacity: 5 quarts (4.7 L) of engine oil when a new filter is installed.
- Filling approach: Add about 5 quarts, start the engine and run briefly, then turn off and let the oil settle before rechecking the level on the dipstick. Top off as needed to reach the full mark.
- Temperature and grade: Use the oil grade recommended in the owner's manual (commonly 5W-30 for most climates). The capacity does not change with oil grade; use the appropriate grade for your environment.
Concluding note: For a standard oil change on a 2002 Silverado with the 5.3L V8, plan to use about 5 quarts of oil with a new filter. Always verify the level on the dipstick after the engine has rested and adjust to the full line as needed.
Summary
The 2002 Silverado 5.3L V8 typically requires about 5 quarts of engine oil for a standard oil change with a new filter. Check the dipstick after the oil has settled to ensure you reach the full mark, and use the oil grade recommended by GM for your climate and driving conditions.