If your Honda uses a dedicated Cruise Main switch, press the MAIN button to OFF to deactivate cruise control. You can also cancel by braking or using the CANCEL control, and re-enable later by turning MAIN back ON and setting a speed.
Understanding Cruise Main in Honda vehicles
Cruise Main powers the cruise control system. When MAIN is OFF, the system is completely disabled and cannot be engaged. When MAIN is ON, you can set, resume, or cancel a cruising speed using the other cruise controls. The exact button placement and labeling can vary by model year, so it’s worth checking your owner's manual if you can’t locate MAIN.
Step-by-step: turning Cruise Main off
The following steps apply to most Honda models that feature a distinct MAIN switch for the cruise control system. If your car uses a different arrangement, use the alternative methods described after the list.
- With cruise active, locate the MAIN switch on the steering wheel or nearby cruise control cluster and press it to OFF to disable the Cruise Main system.
- As an alternative, you can press the brake pedal or press the CANCEL button (if equipped) to temporarily disengage the current set speed while leaving the MAIN switch in the ON position.
- To resume later, press MAIN to ON to re-enable the system, then press SET/RES to resume the previously saved speed or set a new one.
Note: In some Honda models, the exact label or location of the MAIN switch can vary. If you cannot find MAIN, consult your owner's manual or contact a Honda dealer for model-specific instructions.
Model-year and feature variations
Some newer Honda models may combine cruise control controls differently or use steering-wheel buttons labeled CRUISE, CANCEL, MAIN, RES/SET. The general rule remains: turning OFF the MAIN switch disables the system completely; braking or CANCEL temporarily disengages, and pressing MAIN ON will re-enable the system for resuming.
Safety reminders
Always use cruise control in appropriate driving conditions and be prepared to take control manually when needed. Do not rely on cruise control in heavy traffic, on slippery roads, or in unfamiliar terrain where quick braking or acceleration may be required.
Summary
To turn off Cruise Main on a Honda, press the MAIN button to OFF to disable the system entirely. You can also cancel via the brake or the CANCEL control, and re-engage by turning MAIN back ON and setting a speed as needed. If you’re unsure about your specific model, refer to the owner’s manual for model-specific instructions.