To reset the tire pressure light on a Honda Civic, start with properly inflated tires and then recalibrate the system using either a physical reset switch or the vehicle’s settings menu. In many cases, inflated tires and a short highway drive will allow the system to reset automatically. If the light remains, a manual reset or calibration is typically available in the car’s controls.
Understanding the TPMS reset process
The tire pressure monitoring system (TPMS) on a Honda Civic can reset in one of two common ways: a manual reset using a dedicated button or a calibration option within the vehicle’s settings. Knowing which method your Civic uses depends on the model year and trim, so consult your owner’s manual if you’re unsure. Below are the two standard approaches most Civics employ.
Resetting via the TPMS button (physical reset)
Use this method when your model has a TPMS/RESET button located on or near the driver’s dash. This approach is common on several Civic generations and is designed for quick recalibration after proper tire inflation.
- Ensure all four tires are inflated to the recommended pressures listed on the driver’s door jamb or in the owner’s manual.
- Turn the ignition to the ON position with the engine off (ACCESSORY mode). Do not start the engine.
- Locate the TPMS/RESET button. It is often found under the left side of the dash near the fuse box, or on the steering column cover in some trims.
- Press and hold the TPMS/RESET button until the TPMS indicator light flashes or remains steady, then release.
- Drive at speeds above 30–50 mph (50–80 km/h) for about 10 minutes to complete calibration.
After following these steps, the light should turn off if the system has successfully recalibrated. If it stays on, there may be a sensor issue or a tire pressure discrepancy that needs professional attention.
Resetting via the vehicle’s settings menu (calibration)
Some Civic models include a TPMS Calibration option in the instrument cluster or infotainment system. This method is common on newer Civics and those with more advanced digital displays.
- Inflate all four tires to the recommended pressures (as specified on the door placard or in the manual).
- Turn the ignition to ON (engine off) and access the settings menu on the driver information display or infotainment screen.
- Navigate to Settings or Vehicle Settings, then to TPMS Calibration or Tire Pressure Calibration.
- Select Calibrate or Reset and confirm your choice.
- Drive the vehicle at highway speeds (about 50 mph/80 km/h or higher) for 10–15 minutes to allow calibration to complete.
Using the settings menu to calibrate TPMS is effective when the light persists after proper inflation. If the calibration does not complete or the light returns, there may be a faulty sensor or a leak requiring service.
What to do if the light stays on after attempting a reset
If the TPMS light remains illuminated after you’ve inflated the tires and performed a reset or calibration, consider these possibilities:
- One or more tires still have incorrect pressure or a slow leak. Recheck with a reliable gauge and re-inflate as needed.
- A TPMS sensor in a tire may be damaged or dead, especially after a tire change or impact with debris.
- There could be a battery issue in one of the sensors or a fault in the TPMS control module.
If the light won’t reset after multiple attempts, schedule a diagnostic with a Honda dealer or a qualified tire shop. TPMS sensors and related electronics can require specialized tools to diagnose and replace.
Model-year considerations
Honda Civics across different years may implement TPMS reset methods slightly differently. Always consult your owner’s manual for the exact steps and button locations for your specific trim and year. In some cases, a calibration can be performed automatically after a tire rotation or replacement, but manual steps are often necessary if the light is stubborn.
Summary
Resetting the tire pressure light on a Honda Civic generally involves bringing all tires to the recommended pressures and either using a dedicated TPMS reset button or the vehicle’s TPMS calibration setting. A brief highway drive after calibration helps the system complete its recalibration. If the light remains after these steps, a tire leak, sensor issue, or control-module fault may be present, and professional service is advised.
How do I get rid of low tire pressure warning on my Honda?
Step the calibration. Process will finish automatically within a few miles of driving. See your vehicle's owner's manual for more details or go to owners.honda.com for a downloadable.
How do I reset the check tire pressure light on a Honda Civic?
How to Reset Tire Pressure Monitoring System in Newer Honda Vehicles
- From the home screen, select Settings.
- Select Vehicle.
- Select TPMS Calibration.
- Select Calibrate.
Why is my tire pressure light still on after filling tires on my Honda Civic?
If the Honda low-pressure tire light is on in your car, truck, or SUV even after you've made sure that your tires have the correct amount of air, you'll need to reset the Tire Pressure Monitoring System (TPMS).
How to get rid of TPMS on Honda Civic?
And at the top you got deflation warning system press on that one press initialize press calibration start. And okay and that basically if I come back across to here. Start the car.