Usually you don’t manually reset the TPMS light on a 2014 Honda Accord; inflating the tires to the recommended pressures and driving will typically recalibrate the system.
If the light remains after inflation, you may need to perform a recalibration or, on some trims, a manual reset if equipped. This guide explains how TPMS works in this model and provides practical steps to clear the light or diagnose persistent issues.
Understanding TPMS and why the light comes on
The Tire Pressure Monitoring System (TPMS) uses sensors in each wheel to monitor air pressure and alert you when a tire is under-inflated or when a sensor is reporting an issue. In many 2014 Accord models, the light will turn off automatically after you inflate all tires to the door-jamb recommended pressures and drive the car, allowing the system to relearn the new pressures and sensor positions during normal driving. If you rotate tires, replace a tire, or discover a persistent pressure drop, the light may come on again until the system recalibrates.
Automatic recalibration: inflate to spec and drive
Before the list, note that the automatic recalibration method is the default path for most 2014 Accords. The steps below describe what to do first and what to expect when the system recalibrates on its own.
- Check all tires, including the spare if it has a sensor, and inflate each to the recommended cold pressure listed on the driver’s door jamb sticker or in the owner’s manual. Cold means the car hasn’t been driven for several hours or has been parked for a while.
- Recheck the tire pressures after inflating and adjust as needed so every tire matches the recommended value.
- Drive the vehicle at highway speeds (about 50 mph or faster) for at least 10 minutes. This allows the TPMS to relearn the new pressures and confirm sensor readings.
- Observe the TPMS light. If it goes out after this drive, the system has recalibrated successfully; if it remains on, proceed to troubleshooting or a manual reset if your model supports it.
In most cases, this automatic recalibration resolves the issue once the tires are at the correct pressures and the car has had a chance to relearn while driving.
Manual reset option (if your car is equipped)
Some trims or markets may provide a dedicated TPMS reset procedure or switch. If your 2014 Accord does have a reset option, the basic idea is to tell the system to relearn while the tires are inflated to spec. The exact location and method can vary by trim and production region, so consult the owner's manual for your specific vehicle. If you can’t find a reset option, you’ll rely on automatic recalibration by driving at speed after correcting pressures.
Where the reset control is usually found
On many Honda models, the TPMS reset control, if present, is located under the left side of the dash near the knee area, or in the center console area. The exact position can vary by trim, so refer to the owner’s manual or a dealership resource for the precise location on your car.
Typical steps if a reset switch is available
If your Accord has a TPMS reset switch, the common procedure is:
- Turn the ignition to ON with the engine off.
- Locate and press and hold the TPMS reset button until the TPMS indicator light in the gauge cluster blinks or you hear a confirmation chime.
- Release the button and drive the car for several miles to allow the system to relearn the sensors.
Note: If you cannot locate a reset switch, or the light stays on after attempting a manual reset, the system likely needs a drive-based relearn or professional diagnosis.
Troubleshooting if the light won’t reset
Persistent TPMS warnings can indicate more than under-inflation. If the light remains on after inflating to spec and driving, consider these possibilities and actions:
- A tire may have a slow leak or puncture that isn’t obvious. Recheck the pressures regularly and inspect for nails, flats, or valve stem issues.
- A TPMS sensor or its battery could be failing, especially in older vehicles. A diagnostic with a TPMS scan tool can pinpoint faulty sensors.
- Wheel rotations or sensor position changes can require a relearn. If you recently rotated tires, perform the automatic drive recalibration again after inflating.
- Damaged wheel, sensor, or air valve assembly may require professional inspection or replacement.
If basic checks don’t clear the light, a technician with a TPMS diagnostic tool can read sensor data, reprogram sensors if needed, and perform a targeted reset or replacement.
Summary
For most 2014 Honda Accords, clearing the TPMS light starts with inflating all tires to the recommended cold pressures and driving at highway speeds to allow automatic recalibration. If the light persists, you may attempt a manual reset only if your model supports it, otherwise rely on the automatic relearn or seek professional service to check sensors and valves. Regularly monitoring tire pressures and performing timely maintenance can prevent TPMS-related warnings and ensure safe driving.
Does the 2016 Honda Accord have TPMS sensors?
This Honda Accord 2013-19 is equipped with an indirect tire pressure monitoring system (TPMS). This vehicle is equipped with an indirect tire pressure monitoring system (TPMS). The vehicle is not equipped with tire pressure sensors mounted on the wheels.
Does the 2013 Honda Accord have TPMS?
Standard on all 2013 Honda Accords and up is a new type of Tire Pressure Monitoring System, or TPMS for short. The system uses the vehicle's ABS wheel sensors to calculate air pressure based on wheel rotation.
How to reset tire pressure light?
Process will begin if there's no button the procedure is done with the display audio. Begin by pressing the home. Button then touch settings touch vehicle next and then TPMS calibration.
How to reset tire warning on 2014 Honda Accord?
Step the calibration. Process will finish automatically within a few miles of driving. See your vehicle's owner's manual for even more. Details. You can download one at mygar.honda.com.