To reset the oil-life indicator on a 2012 Honda Fit, turn the ignition to ON with the engine OFF and use the maintenance minder controls to reset the Oil Life to 100%. This ensures the maintenance schedule reflects a recent oil change.
In this article, we outline the exact steps, where to find the reset controls on the instrument cluster, and what to expect if the reset doesn’t take on the first try. The 2012 Fit uses Honda’s Maintenance Minder system, which tracks driving conditions and helps determine when service is due.
About the Maintenance Minder and where to reset
The 2012 Honda Fit relies on a Maintenance Minder system that displays reminders for oil changes and other routine maintenance. After you change the oil, you must reset the Oil Life to 100% so future reminders are accurate. The reset control is located on the instrument panel near the odometer/trip meter and is typically labeled Select/Reset.
What you need to know before resetting
Make sure the ignition is in the ON position with the engine off, and identify the Oil Life display in the Maintenance Minder screen. You will be using the Select/Reset control to navigate to Oil Life and perform the reset.
Step-by-step reset procedure
Before performing the reset, ensure the car is stationary and the key is in the proper ignition position. You will navigate to the Oil Life within Maintenance Minder and reset it to 100% by holding the reset control.
- Turn the ignition to ON (II) with the engine off.
- Use the Select/Reset knob on the instrument panel to scroll to the "Oil Life" display within the Maintenance Minder screen.
- Press and hold the Select/Reset knob for about 5–10 seconds until the Oil Life reads 100%.
- Release the knob, turn the ignition OFF, then start the car to confirm the Oil Life shows 100% on the display.
After completing these steps, the Maintenance Minder will be reset, and the oil-life indicator will reflect a fresh oil change interval. If the display does not reset on the first attempt, repeat the steps or consult a dealer for assistance.
Common issues and tips
Some drivers report the reset failing if the wrong display is selected or if the ignition position is not correct. If the Oil Life does not reset, re-enter the Maintenance Minder screen and confirm you are on the Oil Life display, then hold the Select/Reset knob again for the required duration.
Alternative method (if available)
In certain trims or later model updates, a slightly different sequence may exist (for example, using a different button combination). The standard approach described above—cycling to Oil Life and holding the Select/Reset knob—remains the recommended method for the 2012 Fit. If your vehicle behaves differently, consult the owner's manual or a Honda dealer for model-specific guidance.
Summary
Resetting the oil-life indicator on a 2012 Honda Fit is a quick Maintenance Minder task: turn the ignition to ON with the engine off, navigate to Oil Life using the Select/Reset control, hold the control for about 5–10 seconds until it shows 100%, then turn the ignition off and back on to confirm. This resets your maintenance reminders to reflect a fresh oil change and helps you stay on schedule with future services.
How to reset the oil life in a 2012 Honda Fit?
Screen. Step three push and hold the button for 10 seconds until it flashes. Step four release and then hold it again for another 5 seconds until it resets to 100%. And you're done.
How do I reset my oil life on my Honda Fit?
If your display reads “Engine Oil Life,” select the Reset mode by pressing the Info button on the steering wheel. Then press the Select/Reset button to return your oil life to 100%. If your display reads “Engine Oil Indicator %,” press and hold the Select/Reset knob for more than 5 seconds.
How to reset the oil life on a 2012 Honda?
So it's saying it's A1 service it starts blinking. So we just completed the A1 service so we're going to push and hold. Again. There we go now our oil life's 100%.
How to reset oil life on Honda after oil change?
This can be done by pressing the engine start button twice. On your steering wheel, press the “Menu” button until “Oil Life” appears on your screen. The menu button often has a small “i” on it. Press and hold the “Enter” button on your steering wheel until the “Maintenance Reset” menu appears.