Yes. The Honda Pilot uses a conventional gas cap located behind the fuel-filler door, not a capless fueling system. In current U.S. models, the cap is a standard screw-on unit that you access by opening the fuel door on the vehicle’s side.
Gas cap basics
Here are the essential details about the Pilot’s fuel cap, including where it is, how to use it, and how to maintain it.
- Location: The fuel filler door is on the driver's side (left side) of the vehicle; behind it sits a traditional screw-on gas cap.
- Operation: Open the fuel door, twist the cap counterclockwise to remove, fill the tank, then replace the cap and tighten until you hear it click.
- Maintenance: Keep the cap in good condition; replace if cracked or damaged, and ensure the tether remains attached when refueling to avoid losing the cap. A loose or missing cap can trigger a sealing issue or a warning light.
In short, the Pilot employs a standard gas cap rather than a capless fueling system.
Additional context
Honda has equipped the Pilot with a traditional gas-cap setup across recent model years. If you need to replace the cap or troubleshoot a sealing issue, consult the owner’s manual or a Honda dealership for the correct part and procedure.
Summary
The Honda Pilot has a conventional gas cap located behind the fuel-door on the driver's side. You unscrew it to fill, then reseal it firmly to ensure proper fueling and avoid related warning lights. This setup remains consistent across current Pilot generations.