Yes. Modern Honda Civics equipped with a Tire Pressure Monitoring System (TPMS) can show the current pressure for each tire on the instrument cluster or the vehicle’s multi-information display (MID) or infotainment screen, depending on the model year and trim. You can check the pressures without a gauge by using the TPMS readout in the car’s display.
In most Civics built in the last decade, you access the tire pressures via the driver’s information display: use the steering wheel controls to open the TPMS or Tire Pressure screen and view the pressure for each tire. If a tire is underinflated, the TPMS warning light may also illuminate on the dashboard. For accurate maintenance, verify readings with a handheld gauge and inflate to the recommended specification listed on the door jamb label.
How to view tire pressures on a Honda Civic
Here's how to access the per-tire pressures on most Civics, regardless of trim.
- Turn the ignition to ON (engine not required) and access the driver’s information display using the steering wheel controls.
- Navigate to the Tire Pressure (TPMS) or Vehicle/Info screen. The exact label may vary by year (TPMS, Tire Pressure, or Vehicle Status).
- Select the per-tire readout option to display the current pressures for each wheel: front-left, front-right, rear-left, rear-right.
- If a tire reads low, the TPMS warning light may illuminate in addition to the on-screen readout.
With the per-tire readout, you can quickly spot which tire needs attention and take action before a warning light comes on.
What to do if TPMS shows low pressure
To handle a low-pressure reading, follow these common steps.
- Check all tires when cold with a reliable tire gauge; compare to the recommended cold inflation pressure found on the driver's door jamb placard.
- Inflate the tires to the recommended pressure, including the one shown as low, using a compatible air pump.
- Drive a few miles to allow the TPMS to relearn the new pressures; some systems require a manual reset or re-calibration after topping off.
- If the TPMS indicator remains on or a tire cannot reach the target pressure, inspect for punctures or leaks or consult a tire professional or Honda dealer to check the TPMS sensor.
Regularly monitoring tire pressures helps ensure safety, fuel efficiency, and even tire wear. The TPMS readout is a guide; always verify with a gauge when filling and address any persistent warning promptly.
Model-year scope and variations
The ability to view per-tire pressures and the method to access them has become more common in newer Civics since the 2016 redesign. Most 2016-2024 Civics provide a per-tire readout on the instrument cluster or the MID/infotainment screen. Earlier Civics or base trim levels may only show a general TPMS warning light. Always check your owner's manual for the exact steps for your trim and year.
Summary
Most Honda Civics with TPMS can display tire pressures for each wheel on the instrument cluster or information display. Access the TPMS readout via the steering wheel controls, view the current pressures, and inflate to the recommended specification found on the door jamb label. Use the TPMS as a guide to maintain safe, efficient tire performance, and consult your manual or dealer if the system behaves unusually.